Z-Wave Flood sensor ST812

This flood sensor monitors leakage and sends an alarm when flooding or leakage is detected .

Picture of Z-Wave Flood sensor ST812 :

Specification:

 This sensor monitors leakage and sends an alarm when flooding or leakage is detected. The sensing device can be away up to 3 m from the main device. The unit can be mounted on every flat surface. The installation can be done with screws or double-sided tape.The ST812 is a battery-powered device, which is in sleeping state unless an action is detected. After a programmable sleeping time the device wakes up and sends a status information. After this the unit goes back to sleeping modus. Batteries can be changed without unscrewing the device from the door or frame. The unit will give a visual warning on the device and sends a warning to the Z-Wave controller, when batteries need to be replaced. The units send information to a controller or any other associated Z-Wave device. Up to 4 devices can be controlled from this device.The device needs to be included into a Z-Wave network by a remote control or any other Z- Wave controller. For configuration of certain behaviour a static controller such as a PC with home automation software or a gateway is recommended.

 

Technical Data:

Wireless behaviour: transmitter Z-Wave type: slave Distance: up to 30 m in buildings Display: - Local interaction: one button for network operations Power supply: 3 * AA  batteries Dimensions: 85x85x41 mm (HxWxD) Weight: 185 gr.

Welcome to contact with me for more detail information.

Waiting for your kindly inquiry:)

Z-Wave Flood sensor ST812