Z-Wave Lens changeable PIR motion sensor SP814

Z-Wave Lens changeable PIR motion sensor SP814 Distance: up to 30 m Frequency:868.42MHz

Picture of Z-Wave PIR sensor SP814:

Specification:

This presense detector using PIR (passive infrared receiver) detects the presence of a person in a room. The units send information to a controller or any other associated Z-Wave device. Up to 4 devices can be controlled from this device.The sensor is a battery-powered device, which is in sleeping state unless an action is detected. After a programmable sleeping time the device wakes up and sends a status information. After this the unit goes back to sleeping modus. Batteries can be changed without unscrewing the device from the door or frame. The unit will give a visual warning on the device and sends a warning to the Z-Wave controller, when batteries need to be replaced. The unit offers a tampering control and sends an alarm message when tampered. 

The device has changable lenses to optimize the monitoring of the room. A built in 60 db siren can be used if the  sensor is in security application mode. A built in light sensor can be used to detec ambient light.

The device needs to be included into a Z-Wave network by a remote control or any other Z- Wave controller. For configuration of certain behaviour a static controller such as a PC with home automation software or a gateway is required.

 

 

Technical Data:

Wireless behaviour: transmitterZ-Wave type: slaveDistance: up to 30 m in buildingsDisplay: LEDLocal interaction: one button for inclusion, wakeup and exclusionDistance: up to 12 mAngle: 110 degree on default for wall, 360 degree for ceiling mountingPower   supply: 3 * AA batteries

Welcome to contact with me for more detail information.

Waiting for your kindly inquiry:)

Z-Wave Lens changeable PIR motion sensor SP814